 English |
|
|
|
|
|
|
|
| SH72544R Datasheet, PDF (18/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System | |||
| |||
| ◁ |
Section 1 Connecting the Emulator with the User System
When the circuit is connected as shown in figure 1.6, the switches of the emulator are set as SW2
= 1 and SW3 = 1. For details, refer to section 3.8, Setting the DIP Switches, in the SuperHTM
Family E10A-USB Emulator Userâs Manual.
All pulled-up at 4.7 kΩ or more
Vcc Vcc
Vcc Vcc
H-UDI port connector
(14-pin type)
9
GND
10 GND
12
GND
13 GND
14 GND
TCK 1
2
TRST
TDO 3
4
N.C.
5
TMS
6
TDI
RES 7
8
N.C.
11
UVCC
1 kΩ
Reset signal
Vcc = 3.3-V power supply
Vcc
Target MCU
TCK
TRST
TDO
TMS
TDI
RES
ASEMD
User system
Figure 1.6 Recommended Circuit for Connection between the H-UDI Port Connector and
MCU when the Emulator is in Use (14-Pin Type)
Rev. 2.00 Jun. 08, 2009 Page 12 of 46
REJ10J1941-0200
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese