SH72544R Datasheet, PDF (45/56 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 2 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531FCC,
and SH72531
occur at this address. When the program halts with the event condition, the mark z
disappears.
2.2.5 Notes on Setting the [Event Condition] Dialog Box and the BREAKCONDITION_
SET Command
1. When [Go to cursor], [Step In], [Step Over], or [Step Out] is selected, the settings of Event
Condition 3 are disabled.
2. When an Event Condition is satisfied, emulation may stop after two or more instructions have
been executed.
2.2.6 Performance Measurement Function
The emulator supports the performance measurement function.
Note: The performance measurement function is not available when the target device is the
SH72544R, SH72543R, or SH72531.
(1) Setting the Performance Measurement Conditions
To set the performance measurement conditions, use the [Performance Analysis] dialog box and
the PERFORMANCE_SET command. When any line in the [Performance Analysis] window is
clicked with the right mouse button, a popup menu is displayed and the [Performance Analysis]
dialog box can be displayed by selecting [Setting].
Note: For the command line syntax, refer to the online help.
Rev. 2.00 Jun. 08, 2009 Page 39 of 46
REJ10J1941-0200