UPD70F3741GC Datasheet, PDF (420/889 Pages) Renesas Technology Corp – RENESAS MCU V850ES/JG3 Microcontrollers

V850ES/JG3
CHAPTER 12 REAL-TIME OUTPUT FUNCTION (RTO)
12.4 Operation
If the real-time output operation is enabled by setting the RTPC0.RTPOE0 bit to 1, the data of the RTBH0 and RTBL0
registers is transferred to the real-time output latch in synchronization with the generation of the selected transfer trigger
(set by the RTPC0.EXTR0 and RTPC0.BYTE0 bits). Of the transferred data, only the data of the bits for which real-time
output is enabled by the RTPM0 register is output from the RTP00 to RTP05 bits. The bits for which real-time output is
disabled by the RTPM0 register output 0.
If the real-time output operation is disabled by clearing the RTPOE0 bit to 0, the RTP00 to RTP05 signals output 0
regardless of the setting of the RTPM0 register.
Figure 12-2. Example of Operation Timing of RTO0 (When EXTR0 Bit = 0, BYTE0 Bit = 0)
INTTP5CC0 (internal)
INTTP4CC0 (internal)
CPU operation
A
B
A
B
A
B
A
B
RTBH0 D01
D02
D03
D04
RTBL0
D11
D12
D13
D14
RT output latch 0 (H)
D01
D02
D03
D04
RT output latch 0 (L)
D11
D12
D13
D14
A: Software processing by INTTP5CC0 interrupt request (RTBH0 write)
B: Software processing by INTTP4CC0 interrupt request (RTBL0 write)
Remark For the operation during standby, see CHAPTER 21 STANDBY FUNCTION.
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
Page 404 of 870