UPD70F3741GC Datasheet, PDF (219/889 Pages) Renesas Technology Corp – RENESAS MCU V850ES/JG3 Microcontrollers

V850ES/JG3
CHAPTER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
7.5 Operation
TMPn can perform the following operations.
Operation
TPnCTL1.TPnEST Bit
TIPn0 Pin
Capture/Compare Compare Register
(Software Trigger Bit) (External Trigger Input) Register Setting
Write
Interval timer mode
Invalid
External event count mode^{Note 1}
Invalid
External trigger pulse output mode^{Note 2} Valid
One-shot pulse output mode^{Note 2}
Valid
Invalid
Invalid
Valid
Valid
Compare only
Compare only
Compare only
Compare only
Anytime write
Anytime write
Batch write
Anytime write
PWM output mode
Invalid
Invalid
Compare only
Batch write
Free-running timer mode
Pulse width measurement mode^{Note 2}
Invalid
Invalid
Invalid
Invalid
Switching enabled Anytime write
Capture only
Not applicable
Notes 1. To use the external event count mode, specify that the valid edge of the TIPn0 pin capture trigger input is not
detected (by clearing the TPnIOC1.TPnIS1 and TPnIOC1.TPnIS0 bits to “00”).
2. When using the external trigger pulse output mode, one-shot pulse output mode, and pulse width
measurement mode, select the internal clock as the count clock (by clearing the TPnCTL1.TPnEEE bit to 0).
Remark n = 0 to 5
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
Page 203 of 870