RX64M_16 Datasheet, PDF (25/228 Pages) Renesas Technology Corp – 120-MHz 32-bit RX MCU, on-chip FPU, 240 DMIPS, up to 4-MB flash memory

RX64M Group
1. Overview
Table 1.4
Pin Functions (8/8)
Classifications
Pin Name
I/O ports
P00 to P03, P05, P07
P10 to P17
P20 to P27
P30 to P37
P40 to P47
P50 to P56
P60 to P67
P70 to P77
P80 to P83, P86, P87
P90 to P97
PA0 to PA7
PB0 to PB7
PC0 to PC7
PD0 to PD7
PE0 to PE7
PF0 to PF5
PG0 to PG7
PJ3, PJ5
I/O
Description
I/O
6-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins (P35: input pin)
I/O
8-bit input/output pins
I/O
7-bit input/output pins
(176-pin devices have only P50 to P53)
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
6-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
8-bit input/output pins
I/O
6-bit input/output pins
I/O
8-bit input/output pins
I/O
2-bit input/output pins
Note: Note the following regarding pin names. For details, see section 1.5, Pin Assignments.
 We recommend using pins that have a letter (“-A”, “-B”, etc.) to indicate group membership appended to their names as groups.
For the RSPI, QSPI, SDHI, and MMC interfaces, the AC portion of the electrical characteristics is measured for each group.
 Pins that have "-DS" appended to their names can be used as triggers for release from deep software standby.
 RIIC pin functions that have [FM+] appended to their names support fast-mode plus.
R01DS0173EJ0110 Rev.1.10
Oct 24, 2016
Page 25 of 228