RX64M_16 Datasheet, PDF (140/228 Pages) Renesas Technology Corp – 120-MHz 32-bit RX MCU, on-chip FPU, 240 DMIPS, up to 4-MB flash memory

RX64M Group
5.2 DC Characteristics
5. Electrical Characteristics
Table 5.2 DC Characteristics (1)
Conditions: VCC = AVCC0 = AVCC1 = VCC_USB = V_BATT = 2.7 to 3.6 V, 2.7 ≤ VREFH0 ≤ AVCC0,
VCC_USBA = AVCC_USBA = 3.0 to 3.6 V,
VSS = AVSS0 = AVSS1 = VREFL0 = VSS_USB = VSS1_USBA = VSS2_USBA = PVSS_USBA = AVSS_USBA = 0 V,
T_a = T_opr
Schmitt trigger
input voltage
Item
IRQ input pin*¹
MTU input pin*¹
GPT input pin*¹
POE3 input pin*¹
TPU input pin*¹
TMR input pin*¹
SCI input pin*¹
ADTRG# input pin*¹
RES#, NMI
RIIC input pin
(except for SMBus)
Ports for 5 V tolerant*²
Symbol
V_IH
V_IL
∆V_T
Min.
VCC × 0.8
–0.3
VCC × 0.06
V_IH
VCC × 0.7
V_IL
–0.3
∆V_T
VCC × 0.05
V_IH
VCC × 0.8
V_IL
Other input pins excluding ports
V_IH
for 5 V tolerant*³
V_IL
Input high voltage MD pin, EMLE
V_IH
(except for Schmitt _{EXTAL, RSPI input pin,}
trigger input pin) _{EXDMAC input pin, WAIT#,}
TCK, SSI input pin,
SDHI input pin, MMC input pin,
PDC input pin, QSPI input pin
ETHERC input pin
D0 to D31
RIIC (SMBus)
Input low voltage MD pin, EMLE
V_IL
(except for Schmitt
trigger input pin)
EXTAL, RSPI input pin,
ETHERC input pin,
EXDMAC input pin, WAIT#, TCK,
SSI input pin,
SDHI input pin, MMC input pin,
PDC input pin, QSPI input pin
D0 to D31
RIIC (SMBus)
–0.3
VCC × 0.8
–0.3
VCC × 0.9
VCC × 0.8
2.3
VCC × 0.7
2.1
–0.3
–0.3
–0.3
–0.3
Typ.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Max.
Unit
VCC + 0.3 V
VCC × 0.2
—
Test
Conditions
VCC + 3.6
(≤ 5.8 max.)
VCC × 0.3
—
VCC + 3.6
(≤ 5.8 max.)
VCC × 0.2
VCC + 0.3
VCC × 0.2
VCC + 0.3 V
VCC + 0.3
VCC + 0.3
VCC + 0.3
5.8
VCC × 0.1 V
VCC × 0.2
VCC × 0.3
0.8
Note 1.
Note 2.
Note 3.
This does not include the pins, which are multiplexed as ports for 5 V tolerant.
Ports 07, 11 to 17, 20, 21, 30 to 33, 67, and C0 to C3 are 5 V tolerant.
For P32, P31, and P30, input as follows when the V_BATT power supply is selected.
VIH Min. = V_BATT × 0.8, VIH Max. = V_BATT + 0.3, VIL Min. = –0.3, VIL Max. = V_BATT × 0.2 (V_BATT = 2.0 to 3.6 V)
R01DS0173EJ0110 Rev.1.10
Oct 24, 2016
Page 140 of 228