MN101E30N Datasheet, PDF (8/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
- Watchdog timer
- Time-out cycle can be selected from fs/2¹⁶, fs/2¹⁸, fs/2²⁰
- On detection of errors, hard reset is done inside LSI.
- Synchronous output function
- Timer synchronous output, interrupt synchronous output Port 8 outputs the latched data, on
the event timing of the synchronous output signal of timer 1, 2, or 7, or of the external
interrupt 2 (IRQ2).
- Buzzer Output/Reverse Buzzer Ouput:
- Output frequency can be selected from fpll/2⁹,fpll/2¹⁰,fpll/2¹¹,fpll/2¹²,fpll/2¹³, fpll/2¹⁴,fx/
2³,fx/2⁴.
- Remote Control Carrier Output:
- A remote control carrier output with duty cycle of 1/2 or 1/3 of timer 0 or timer 3 output
are available.
- A/D Converter:
10-bit x 12 channels
- D/A Converter:
8-bit x 4 channels
- Data automatic transfer:2 systems
ATC0
Data is transferred automatically in all memory space
- External request/internal event request/software request
- Maximum transfer cycles are 255
- Support continuous serial transmission / reception.
- Burst transfer function (Urgent stop of interrupts is contained.)
ATC1
Data is transferred automatically in all memory space
- External request/internal event request/software request
- Maximum transfer cycles are 255
- Support continuous serial transmission / reception.
- Burst transfer function (Urgent stop of interrupts is contained.)
Publication date: October 2015