MN101E30N Datasheet, PDF (10/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
- Sequence transmission, reception or both are available.
Full duplex UART (Baud rate timer, Timer0,1,2,3,4 and A)
- Parity check, Overrun error / Framing error detection
- Transfer size 7 to 8 bits can be selected.
Serial 4 (multi master I2C / Synchronous serial interface)
Synchronous serial interface
- Transfer clock source
fpll/2, fpll/4, fpll/8, fpll/32, fs/2, fs/4, Timer0,1,2,3,4 and A output, external clock
- MSB/LSB can be selected as the first bit to be transferred. An arbitrate transfer size from 1
to 8 bits can be selected.
- Sequence transmission, reception or both are available.
Multi master I2C
- 7-bit of slave address can be set.
- General call communication mode handling
Serial 5
- IIC slave interface
- IIC high-speed transfer mode (communication speed: 400 kbps)
- 7-bit or 10-bit of slave address can be set.
- General call communication mode handling
- LED Driver: 8 pins (Push-pull structure)
- Automatic Reset
- LCD Driver: LCD driver pins
Segment output max. 55 pins (SEG0 to 54)
SEG0 to 54 can be switched to I/O ports by 1 pin
[Note:At reset, SEG0 to 54 are input ports.]
Common output pins:4 pins
COM0 to 3 can be switched to I/O ports by 1 pin
Display mode selection
Static
1/2 duty, 1/2 bias
1/3 duty, 1/3 bias
1/4 duty, 1/3 bias
Publication date: October 2015