MN101E30N Datasheet, PDF (38/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
V_DD5=2.2 V to 5.5 V V_SS=0 V
Ta=-40 C to +85 C
Parameter
Symbol
Conditions
Rating
Unit
MIN TYP MAX
I/O pin 6 P20 (during used as ACZ) and P21 (during used as ACZ) are regulated at 5.0 V
38 Input high voltage1
V_DHH
4.5
39 Input high voltage2
V_DHL
1.5
Figure:1.5.5
V
40 Input low voltage1
V_DLH
3.5
41 Input low voltage2
V_DLL
0.5
42 Input clamp current
I_C3
V_IN > V_DD5, V_IN < 0 V
500 A
Display output pin 1 COM0 to COM3 (At V_LC1, V_SS Voltage output) *9
Output high voltage
43 _{(In VLC1 voltage output)}
Output low voltage
44 _{(In VSS voltage output)}
V_OCOMH V_DD5=V_LC1=5.0 V I_COM= -10 A
4.4
V_OCOML V_DD5=V_LC1=5.0 V I_COM=10 A
V
0.6
Display output pin 2 SEG0 to SEG54 (At V_LC1, V_SS Voltage output) *10
Output high voltage
45 _{(In VLC1 voltage output)}
V_OSEGH V_DD5=V_LC1=5.0 V I_SEG= -2 A
4.4
Output low voltage
46 _{(In VSS voltage output)}
V_OSEGL V_DD5=V_LC1=5.0 V I_SEG=2 A
V
0.6
Display power pin 1 V_LC1, V_LC2, V_LC3
47
Internal dividing resistor
48
R_VL1 Ta=25 C
142.5 300
*11
R_{VL2 (Impedance between VLC1 and VSS)} 15
30
570
k
60
*9 However, COM0 to COM3 are also used as P84 to P87.
*10 However, SEG0 to SEG54 are also used as P10 to P16, P20 to P24, P30 to P36, P40 to P47, P50 to P57, P60 to P67, P70 to
P77and P80 to 83.
*11 Summation of 3 resistors among V_LC1 and V_LC2, V_LC2 and V_LC3, V_LC3 and V_SS
Publication date: October 2015