MN101E30N Datasheet, PDF (5/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
- ADIRQ-AD conversion end (peripheral function group interrupt)
<Automatic Transfer Controller interrupts>
- ATC0IRQ-ATC0 interrupt (peripheral function group interrupt)
- ATC1IRQ-ATC1 interrupt (peripheral function group interrupt)
<External interrupts> Edge selectable
- IRQ0:External interrupt (AC zero-cross detector, With/Without noise filter)
- IRQ1:External interrupt (AC zero-cross detector, With/Without noise filter)
- IRQ2:External interrupt (Both edges interrupt)
- IRQ3:External interrupt (Both edges interrupt)
- IRQ4:External interrupt (Both edges interrupt)
- IRQ5:External interrupt (Key scan interrupt only)
<Audio interrupts>
- Audio reproduction end interrupt
- Audio phrase end interrupt
- Timer Counter: 11 timers All timer counters generate interrupt (10 can be operated independently)
- 8-bit timer for general use: 5 sets
- 8-bit free-running timer:
1 set
- Time base timer:
1 set
- 16-bit timer for general use: 3 sets
- Simple 8-bit timer:
1 set
Timer 0 (8-bit timer for general use)
- Square wave output (timer pulse output), added pulse(2-bit) system PWM output (can be
output to large current pin TM0IOB), event count, remote control carrier output, simple
pulse with measurement
- Clock source
fpll, fpll/4, fpll/16, fpll/32, fpll/64, fpll/128, fs/2, fs/4, fs/8, fx, external clock,
TimerA output
- Real timer output control
Control the timer (PWM) output by the falling edge of external interrupt 0 (IRQ0) with
the follow 3 value; “High”-fixed, “LOW”-fixed and “Hi-Z”-fixed
Timer 1 (8-bit timer for general use)
-Square wave output (timer pulse output), event count, 16-bit cascade connected (timer0, 1)
timer synchronous output event
Publication date: October 2015