MN101E30N Datasheet, PDF (23/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
Name
TM7IOA
TM7IOB
TM7IOC
TM8IOA
TM8IOB
TM8IOC
TM9IOA
TM9IOB
NO I/O
6 I/O
22
40
7
23
41
8
24
Other Function
AN5,PA5
RXD1A,SBI1A,LED0,P00
P15,SEG44,BUZZERB
AN6,PA6
TXD1A,SBO1A,LED1,P01
P16,SEG43,NBUZZERB
AN7,PA7
SBT1A,LED2,P02
TM9OD0
TM9OD1
TM9OD2
TM9OD3
TM9OD4
TM9OD5
SDO0
SDO1
SDO2
SDO3
SDO4
SDO5
SDO6
SDO7
V_REF+
81 output
82
83
84
85
86
81 output
82
83
84
85
86
87
88
100 -
SDO0,A11,SEG3,P80
SDO1,A12,SEG2,P81
SDO2,A13,SEG1,P82
SDO3,A14,SEG0,P83
SDO4,A15,COM0,P84
SDO5,A16,COM1,P85
TM9OD0,A11,SEG3,P80
TM9OD1,A12,SEG2,P81
TM9OD2,A13,SEG1,P82
TM9OD3,A14,SEG0,P83
TM9OD4,A15,COM0,P84
TM9OD5,A16,COM1,P85
A17,COM2,P86
A18,COM3,P87
AN0
AN1
AN2
AN3
AN4
AN5
AN6
AN7
AN8
AN9
AN10
AN11
DA_A
1 input
2
3
4
5
6
7
8
100
99
98
97
29 output
RMOUTA,TM0IOA,PA0
TM1IOA,PA1
TM2IOA,PA2
TM3IOA,PA3
TM4IOA,PA4
TM7IOA,PA5
TM8IOA,PA6
TM9IOA,PA7
PB0
PB1
PB2
PB3
P07,LED7
DA_B
DA_C
DA_D
IRQ0
IRQ1
IRQ2
IRQ3
IRQ4
66
91
92
30 input
31
32
33
34
P61,SEG18
V_LC1,P94
P95
P20,SEG54
P21,SEG53,ACZ1
P22,SEG52
P23,SEG51
P24,SEG50
Function
Description
Timer I/O pins
Event counter clock input pin, timer output and PWM
signal output pin for 16-bit timer7 and 8.
To use this pin as event clock input, configure this as
input with the PADIR register. In the input mode, pull-
up resistors can be selected by P0PLU register,
P1PLU register and PAPLU register.
For timer output, PWM signal output, select the spe-
cial function pin by the port 0 output mode register,
port 1 output mode register and port A output mode
register (P0OMD, P1OMD and PAOMD), and set to
the output mode at P0DIR register, P1DIR register
and PADIR register.
These can be used as normal I/O pins when not used
as timer I/O pins.
Timer output pins Timer output and PWM signal output pin for 16-bit
timer.
To select timer output and PWM signal output, select
the special function pin by the P8OMD1 register, and
set to the output mode at the P8DIR register.
These can be used as normal I/O pins when not used
as timer I/O pins.
Synchronous
output pins
8-bit synchronous output pins.
Synchronous output for each bit can be selected indi-
vidually by the port 8 synchronous output control reg-
ister (P8SYO). Set to the output mode by the P8DIR
register.
These pins can be used as a normal I/O pins when not
used for synchronous output pin.
+ power supply Reference power supply pins for the A/D converter.
for A/D converter Use this under the condition: 2.0 V  V_REF+  V_DD5
Analog input pins Analog input pins for an 16-channel, 10-bit A/D con-
verter.
When not used for analog input, these pins can be
used as normal input pins.
Analog output
pins
Analog output pins for an 4-channel, 8-bit A/D con-
verter.
When not used for analog output, these pins can be
used as normal I/O pins.
External interrupt
input pins
External interrupt input pins.
The valid edge for IRQ0 to 4 can be selected with the
IRQnICR register.
IRQ1 has AC zero-cross detection function. IRQ1 can
be set at both edges at pin voltage level.
When not used for interrupts, these can be used as
normal input pins.
Publication date: October 2015