MN101E30N Datasheet, PDF (21/48 Pages) Panasonic Semiconductor – 8-bit Single-chip Microcontroller

MN101E30N/E30R/EF30R
8-bit Single-chip Microcontroller
PubNo. 2163001-019E
Name
SBI0A
SBI0B
SBI1A
SBI1B
SBI2A
SBI2B
SBI3A
SBI3B
SBI4A
SBI4B
SBT0A
SBT0B
SBT1A
SBT1B
SBT2A
SBT2B
SBT3A
SBT3B
SBT4A
SBT4B
TXD0A
TXD0B
TXD1A
TXD1B
TXD2A
TXD2B
TXD3A
TXD3B
RXD0A
RXD0B
RXD1A
RXD1B
RXD2A
RXD2B
RXD3A
RXD3B
SDA4A
SDA4B
SDA5A
SDA5B
NO I/O
Other Function
63 input P51,SEG21,KEY1,D1
53
P44,SEG31,RXD0B
22
RXD1A,TM7IOB,LED0,P00
79
RXD1B,A9,SEG5,P76
74
P71,SEG10,A7,RXD2A
43
P31,SEG41,RXD2B
27
P05,LED5,RXD3A
50
P41,SEG34,RXD3B
70
P65,SEG14,A3
47
P35,SEG37
62 I/O
P52,SEG22,KEY2,D2
54
P45,SEG30
24
TM9IOB,LED2,P02
80
A10,SEG4,P77
75
P72,SEG9,NWE
44
P32,SEG40
28
P06,LED6
51
P42,SEG33
72
P67,SEG12,A5,SCL4A
46
P34,SEG38,SCL4B
64 output P50,SEG20,KEY0,D0,SBO0A
52
P43,SEG32,SBO0B
23
SBO1A,TM8IOB,LED1,P01
78
SBO1B,A8,SEG6,P75
73
P70,SEG11,A6,SBO2A
42
P30,SEG42,SBO2B
26
P04,LED4,SBO3A
49
P40,SEG35,SBO3B
63 input
53
22
79
74
43
27
50
71 I/O
45
76
55
P51,SEG21,KEY1,D1,SBI0A
P44,SEG31,SBI0B
SBI1A,TM7IOB,LED0,P00
SBI1B,A9,SEG5,P76
P71,SEG10,A7,SBI2A
P31,SEG41,SBI2B
P05,LED5,SBI3A
P41,SEG34,SBI3B
P66,SEG13,A4,SBO4A
P33,SEG39,SBO4B
NRE,SEG8,P73
P46,SEG29
Function
Serial interface
reception
data input pins
Serial interface
clock I/O pins
UART
transmission
data output pins
UART reception
data input pins
IIC data I/O pins
Description
Reception data output pins for serial interface 0 to 4.
A pull-up resistor can be selected with the P0ODC,
P3ODC, P4ODC, P5ODC, P6ODC, P7ODC registers.
Select the output mode at the P0DIR, P3DIR, P4DIR,
P5DIR, P6DIR and P7DIR registers and serial data
output mode by serial mode register 1 (SC0MD1 to
SC4MD1).
These can be used as normal I/O pins when the serial
interface is not used.
Clock I/O pins for serial interface 0 to 4.
The output configuration, either CMOS push-pull or n-
channel open-drain can be selected with the P0ODC,
P3ODC, P4ODC, P5ODC, P6ODC, P7ODC registers.
Pull-up resistor can be selected by the P0PLUD,
P3PLUD, P4PLUD, P5PLUD, P6PLUD and P7PLUD
registers. Select the clock I/O with the P0DIR, P3DIR,
P4DIR, P5DIR, P6DIR and P7DIR registers and serial
data output mode by serial mode register 1 (SC0MD1
to SC4MD1) according to the communication.
These can be used as normal I/O pins when the serial
interface is not used.
In the serial interface0 to 3 in UART mode, this pin is
configured as the transmission data output pin.
The output configuration, either CMOS push-pull or n-
channel open-drain can be selected with the P0ODC,
P3ODC, P4ODC, P5ODC, P7ODC registers.
Pull-up resistor can be selected by the P0PLUD,
P3PLUD, P4PLUD, P5PLUD and P7PLUD registers.
Select the output mode at the P0DIR, P3DIR, P4DIR,
P5DIR and P7DIR registers and serial data output
mode by serial mode register 1 (SC0MD1 to
SC3MD1).
These can be used as normal I/O pins when the serial
interface is not used.
In the serial interface0 to 3 in UART mode, this pin is
configured as the reception data output pin.
Pull-up resistor can be selected by the P0PLUD,
P3PLUD, P4PLUD, P5PLUD and P7PLUD registers.
Select the output mode at the P0DIR, P3DIR, P4DIR,
P5DIR and P7DIR registers and serial data output
mode by serial mode register 1 (SC0MD1 to
SC3MD1).
These can be used as normal I/O pins when the serial
interface is not used.
In the serial interface4, 5 in IIC mode, this pin is con-
figured as the data input / output pin.
For the output configuration, select n-channel open-
drain with the P3ODC, P4ODC, P6ODC and P7ODC
registers and pull-up resistors by the P3PLUD,
P4PLUD, P6PLUD and P7PLUD registers. Select the
output mode at the P3DIR, P4DIR, P6DIR and P7DIR
registers and serial data input / output mode by serial
mode register 1 (SC4MD1, SC5MD1).
These can be used as normal I/O pins when the serial
interface is not used.
Publication date: October 2015