AR0130 Datasheet, PDF (8/53 Pages) ON Semiconductor – CMOS Digital Image Sensor

AR0130: 1/3-Inch CMOS Digital Image Sensor
Functional Overview
Table 3:
Pad Descriptions
Name
STANDBY
VDD_PLL
VAA
EXTCLK
VDD_SLVS
DGND
VDD
AGND
SADDR
SCLK
SDATA
VAA_PIX
LINE_VALID
FRAME_VALID
PIXCLK
VDD_IO
DOUT8
DOUT9
DOUT10
DOUT11
Reserved
DOUT4
DOUT5
DOUT6
DOUT7
TRIGGER
OE_BAR
DOUT0
DOUT1
DOUT2
DOUT3
RESET_BAR
FLASH
NC
Type
Input
Power
Power
Input
Power
Power
Power
Power
Input
Input
I/O
Power
Output
Output
Output
Power
Output
Output
Output
Output
Input
Output
Output
Output
Output
Input
Input
Output
Output
Output
Output
Input
Output
Input
Description
Standby-mode enable pin (active HIGH).
PLL power.
Analog power.
External input clock.
Digital power (do not connect).
Digital ground.
Digital power.
Analog ground.
Two-Wire Serial Interface address select.
Two-Wire Serial Interface clock input.
Two-Wire Serial Interface data I/O.
Pixel power.
Asserted when DOUT line data is valid.
Asserted when DOUT frame data is valid.
Pixel clock out. DOUT is valid on rising edge of this clock.
I/O supply power.
Parallel pixel data output.
Parallel pixel data output.
Parallel pixel data output.
Parallel pixel data output (MSB)
Connect to DGND.
Parallel pixel data output.
Parallel pixel data output.
Parallel pixel data output.
Parallel pixel data output.
Exposure synchronization input.
Output enable (active LOW).
Parallel pixel data output (LSB)
Parallel pixel data output.
Parallel pixel data output.
Parallel pixel data output.
Asynchronous reset (active LOW). All settings are restored to factory default.
Flash control output.
Do not connect.
AR0130 DS Rev. L Pub. 6/15 EN
8
©Semiconductor Components Industries, LLC, 2015.