English
Language : 

COP8TAB9 Datasheet, PDF (54/59 Pages) National Semiconductor (TI) – 8-Bit CMOS Flash Microcontroller with 2k Byte or 4k Byte Memory
20.0 Development Support
20.1 TOOLS ORDERING NUMBERS FOR THE COP8TA 2.5V FLASH FAMILY DEVICES
This section provides specific tools ordering information for the devices in this datasheet, followed by a summary of the tools and
development kits available at print time. Up-to-date information, device selection guides, demos, updates, and purchase
information can be obtained at our web site at: www.national.com/cop8.
Unless otherwise noted, tools can be purchased for worldwide delivery from National’s e-store: http://www.national.com/
store/
Tool
Order Number
Cost* Notes/Includes
Evaluation Software and Reference Designs
Software and Utilities Web Downloads:
Free Assembler/ Linker/ Simulators/ Library Manager/
www.national.com/cop8
Compiler Demos/ Flash ISP and NiceMon Debugger
Utilities/ Example Code/ etc.
(Flash Emulator support requires licensed COP8-NSDEV
CD-ROM).
Hardware Reference None
Designs
Starter Kits and Hardware Target Boards
Starter Development COP8-DB-TAC
L
Supports COP8TA - Target board with 44LLP and 28SOIC
Kits
sockets, LEDs, Test Points, and Breadboard Area.
Development CD, ISP Cable and Source Code. No p/s.
Also supports COP8 Low Voltage Flash Emulator and
Kanda ISP Tool.
Software Development Languages, and Integrated Development Environments
National’s WCOP8 IDE COP8-NSDEV
Fully Licensed IDE with Assembler and
and Assembler on CD
Emulator/Debugger Support. Assembler/ Linker/
Simulator/ Utilities/ Documentation. Updates from web.
Included with COP8-DB-TAC, SKFlash, COP8 Emulators.
COP8 Library Manager www.kkd.dk/libman.htm
Eval The ultimate information source for COP8 developers -
from KKD
Integrates with WCOP8 IDE. Organize and manage code,
notes, datasheets, etc.
Hardware Emulation and Debug Tools
Hardware Emulators COP8-IMFlash-LV
M
Includes 110v/220v p/s, target cable with 2x7 connector,
manuals and software on CD.
Development and Production Programming Tools
Programming Adapters COP8-PGMA-20SF2
L
For programming 20SOIC COP8TA only.
(For any programmer COP8-PGMA-28SF2
supporting flash adapter
base pinout)
COP8-PGMA-44CF2
L
For programming 28SOIC COP8TA only.
L
For programming 44LLP COP8TAC only.
KANDA’s Flash ISP
COP8 USB ISP
L
USB connected Dongle, with target cable and Control
Programmer
www.kanda.com
Software; Updateable from the web; Purchase from
www.kanda.com
Development Devices COP8TAB9
Free All packages. Obtain samples from: www.national.com
COP8TAC9
*Cost: Free; VL=<$100; L=$100-$300; M=$300-$1k; H=$1k-$3k; VH=$3k-$5k
www.national.com
54