COP87L88EB Datasheet, PDF (35/72 Pages) National Semiconductor (TI) – 8-Bit CMOS OTP Microcontrollers with 16k or 32k Memory, CAN Interface, 8-Bit A/D, and USART

Interrupts
INTRODUCTION
Each device supports fourteen vectored interrupts. Interrupt
sources include Timer 0, Timer 1, Timer 2, Timer 3, Port L
Wakeup, Software Trap, MICROWIRE/PLUS, and External
Input.
All interrupts force a branch to location 00FF Hex in program
memory. The VIS instruction may be used to vector to the
appropriate service routine from location 00FF Hex.
The Software trap has the highest priority while the default
VIS has the lowest priority.
Each of the 14 maskable inputs has a fixed arbitration rank-
ing and vector.
Figure 31 shows the Interrupt Block Diagram.
FIGURE 31. Interrupt Block Diagram
DS100044-15
35
www.national.com