M37754FFCGP Datasheet, PDF (5/68 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
MITSUBISHI MICROCOMPUTERS
M37754FFCGP
M37754FFCHP
SHINGLE-CHIP 16-BIT CMOS MICROCOMPUTER FLASH MEMORY VERSION
FUNCTIONS (Microcomputer mode)
Parameter
Number of basic machine instructions
Instruction execution time
Memory size
Flash memory
RAM
P0, P1, P4–P8, P10, P11
P2
Input/Output ports
P3
P9
Multiple-function timers
TA0, TA1, TA2, TA3, TA4
TB0, TB1, TB2
Serial I/O
A-D converter
D-A converter
Watchdog timer
Dead-time timer
Interrupts
Clock generating circuit
Supply voltage
Power dissipation
Input/Output characteristic
Memory expansion
Operating temperature range
Device structure
Package
Input/Output withstand voltage
Output current
Functions
109 (103 basic instructions of 7700 Family + 6 special instructions)
100 ns (the fastest instruction at external clock 40 MHz frequency)
120 Kbytes
3968 bytes
8-bit × 9
5-bit × 1
4-bit × 1
6-bit × 1
16-bit × 5
16-bit × 3
(UART or clock synchronous serial I/O) × 2
10-bit × 1(8 channels)
8-bit × 2
12-bit × 1
8-bit × 3
5 external types, 16 internal types
(Each interrupt can be set to priority levels 0 – 7.)
Built-in (externally connected to a ceramic resonator or quartz crystal resonator)
5 V±10 %
125 mW (at external clock 40 MHz frequency)
5V
5 mA
Maximum 16 Mbytes
–20 to 85 °C
CMOS high-performance silicon gate process
100-pin plastic molded QFP
FUNCTIONS (Flash memory mode)
Supply voltage
Program/Erase voltage
Flash memory mode
Parameter
Programming method
Erasing method
Parallel I/O mode
Serial I/O mode
CPU reprogramming mode
Parallel I/O mode
Serial I/O mode
CPU reprogramming mode
Program/Erase control method
Parallel I/O mode
Command number
Serial IO mode
CPU reprogramming mode
Number of times for Program/Erase
Functions
5 V ± 10 %
12 V ± 5 %
3 modes
(parallel I/O, serial I/O, CPU reprogramming)
Programming in unit of byte/120 Kbytes
Programming in unit of byte/120 Kbytes
Programming in unit of byte/112 Kbytes
Batch erasing/120 Kbytes
Batch erasing/120 Kbytes
Batch erasing/112 Kbytes or 2-division-block erasing
2-division-block erasing: 56-Kbyte area to be erased is selectable.
Program/Erase control by software command
7 commands
7 commands
7 commands
100
5