PIC16LF1847 Datasheet, PDF (93/408 Pages) Microchip Technology – 18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1847
8.5.5 PIE4 REGISTER
The PIE4 register contains the interrupt enable bits, as
shown in Register 8-5.
Note 1: Bit PEIE of the INTCON register must be
set to enable any peripheral interrupt.
REGISTER 8-5:
U-0
—
bit 7
PIE4: PERIPHERAL INTERRUPT ENABLE REGISTER 4
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
R/W-0/0
BCL2IE
R/W-0/0
SSP2IE
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-2
bit 1
bit 0
Unimplemented: Read as ‘0’
BCL2IE: MSSP2 Bus Collision Interrupt Enable bit
1 = Enables the MSSP2 Bus Collision Interrupt
0 = Disables the MSSP2 Bus Collision Interrupt
SSP2IE: Master Synchronous Serial Port 2 (MSSP2) Interrupt Enable bit
1 = Enables the MSSP2 interrupt
0 = Disables the MSSP2 interrupt
 2011 Microchip Technology Inc.
Preliminary
DS41453A-page 93