PIC16LF1847 Datasheet, PDF (350/408 Pages) Microchip Technology – 18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1847
30.2 DC Characteristics: PIC16(L)F1847-I/E (Industrial, Extended)
PIC16LF1847
PIC16F1847
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D010
—
5.0
12
A
1.8 _{FOSC = 32 kHz, -40°C to +85°C}
—
7.5
14
A
3.0 ^{LP Oscillator mode}
D010
—
24
36
A
1.8 FOSC = 32 kHz, -40°C to +85°C
—
30
43
A
3.0 ^{LP Oscillator mode}
—
32
47
A
5.0
D010A
—
5.0
21
A
1.8 FOSC = 32 kHz, -40°C to +125°C
—
7.5
25
A
3.0 ^{LP Oscillator mode}
D010A
—
24
60
A
1.8 FOSC = 32 kHz, -40°C to +125°C
—
30
70
A
3.0 ^{LP Oscillator mode}
—
32
80
A
5.0
D011
—
60
115
A
—
111
200
A
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode}
D011
—
82
135
A
—
141
225
A
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode}
—
200
320
A
5.0
D012
—
145
280
A
—
260
460
A
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode}
D012
—
165
300
A
—
290
500
A
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode}
—
368
700
A
5.0
D013
—
34
170
A
1.8 FOSC = 1 MHz
—
59
250
A
3.0 ^{EC Oscillator mode, Medium-power mode}
D013
—
60
200
A
—
92
260
A
—
126
350
A
1.8 FOSC = 1 MHz
3.0
EC Oscillator mode
Medium-power mode
5.0
D014
—
118
250
A
—
210
420
A
1.8 FOSC = 4 MHz
3.0
EC Oscillator mode,
Medium-power mode
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: 8 MHz internal RC oscillator with 4x PLL enabled.
4: 8 MHz crystal oscillator with 4x PLL enabled.
5: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
DS41453A-page 352
Preliminary
 2011 Microchip Technology Inc.