LAN8820 Datasheet, PDF (51/83 Pages) Microchip Technology – RGMII 10/100/1000 Ethernet Transceiver

LAN8820/LAN8820I
Bits
Description
Type
7
INT7_EN
R/W
ENERGYON interrupt enable
0 = interrupt source is masked
1 = interrupt source is enabled
6
INT6_EN
R/W
Auto-Negotiation interrupt enable
0 = interrupt source is masked.
1 = interrupt source is enabled.
5
INT5_EN
R/W
Remote Fault Detected interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
4
INT4_EN
R/W
Link Down (Link status negated) interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
3
INT3_EN
R/W
Auto-Negotiation LP Acknowledge interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
2
INT2_EN
R/W
Parallel Detection Fault or Master/Slave Configuration Fault interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
1
INT1_EN
R/W
Auto-Negotiation Page Received interrupt enable.
0 = interrupt source is masked.
1 = interrupt source is enabled.
0
RESERVED
RO
Note: Refer to Section 3.5, "Interrupt Management," on page 21 for additional information.
Default
0b
0b
0b
0b
0b
0b
0b
-
 2009-2015 Microchip Technology Inc.
DS00001871B-page 51