70291E Datasheet, PDF (399/436 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
TABLE 32-5: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Parameter
No.
Typical⁽¹⁾
Max
Doze
Ratio
Units
Conditions
HDC72a
39
45
1:2
mA
HDC72f
18
25
1:64
mA +150°C
3.3V
20 MIPS
HDC72g
18
25
1:128
mA
Note 1: Parameters with Doze ratios of 1:2 and 1:64 are characterized, but are not tested in manufacturing.
TABLE 32-6: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Param
No.
Symbol
Characteristic
Min
Typ Max Units
Conditions
VOL
HDO10
HDO16
VOH
HDO20
HDO26
Output Low Voltage
I/O ports
OSC2/CLKO
Output High Voltage
I/O ports
OSC2/CLKO
—
—
2.40
2.41
— 0.4
— 0.4
—
—
—
—
V IOL = 1 mA, VDD = 3.3V
V IOL = 1 mA, VDD = 3.3V
V IOH = -1 mA, VDD = 3.3V
V IOH = -1 mA, VDD = 3.3V
TABLE 32-7: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Param
No.
Symbol
Characteristic⁽¹⁾
Min Typ Max Units
Conditions
HD130 EP
Program Flash Memory
Cell Endurance
10,000 —
—
E/W -40°C to +150°C⁽²⁾
HD134 TRETD Characteristic Retention
20
—
— Year 1000 E/W cycles or less and no
other specifications are violated
Note 1: These parameters are assured by design, but are not characterized or tested in manufacturing.
2: Programming of the Flash memory is not allowed above 125°C.
© 2011 Microchip Technology Inc.
DS70291E-page 399