70291E Datasheet, PDF (353/436 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
TABLE 31-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
Program Flash Memory
D130 EP
Cell Endurance
10,000 —
— E/W -40°C to +125°C
D131 VPR VDD for Read
VMIN —
3.6
V VMIN = Minimum operating
voltage
D132B VPEW VDD for Self-Timed Write
VMIN —
3.6
V VMIN = Minimum operating
voltage
D134 TRETD Characteristic Retention
20
—
— Year Provided no other specifications
are violated, -40°C to +125°C
D135 IDDP
Supply Current during
Programming
—
10
— mA —
D136a TRW Row Write Time
1.32 — 1.74 ms TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b TRW Row Write Time
1.28 — 1.79 ms TRW = 11064 FRC cycles,
TA = +125°C, See Note 2
D137a TPE Page Erase Time
20.1 — 26.5 ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE Page Erase Time
19.5 — 27.3 ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a TWW Word Write Cycle Time
42.3 — 55.9 µs TWW = 355 FRC cycles,
TA = +85°C, See Note 2
D138b TWW Word Write Cycle Time
41.1 — 57.6 µs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 31-19) and the value of the FRC Oscillator Tun-
ing register (see Register 9-4). For complete details on calculating the Minimum and Maximum time see
Section 5.3 “Programming Operations”.
TABLE 31-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated):
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristics
Min Typ Max Units
Comments
CEFC
External Filter Capacitor
Value
4.7
10
—
μF Capacitor must be low
series resistance
(< 5 ohms)
© 2011 Microchip Technology Inc.
DS70291E-page 353