PIC18F25K20T-ISO Datasheet, PDF (375/456 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC18F2XK20/4XK20
26.7 DC Characteristics: Secondary Oscillator Supply Current, PIC18F2XK20/4XK20
PIC18F2XK20/4XK20
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D022 Supply Current (IDD)^{(1, 2)} 5.5 9 A
5.5 10 A
6.5 14 A
D022A
10.0 15 A
10.0 16 A
-40°C
+25°C
+85°C
-40°C
+25°C
VDD = 1.8V
VDD = 3.0V
FOSC = 32 kHz⁽³⁾
(SEC_RUN mode,
Timer1 as clock)
11.0 20 A
+85°C
D023
2.0 5 A
-40°C
D023A
2.0 5 A
2.5 9 A
3.5 8 A
3.5 8 A
+25°C
+85°C
-40°C
+25°C
VDD = 1.8V
VDD = 3.0V
FOSC = 32 kHz⁽³⁾
(SEC_IDLE mode,
Timer1 as clock)
4.0 12 A
+85°C
Note 1:
2:
3:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and
temperature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
Low-Power mode on T1 osc. Low-Power mode is limited to 85°C.
 2010 Microchip Technology Inc.
DS41303G-page 375