PIC16LF720_11 Datasheet, PDF (37/244 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

4.0 INTERRUPTS
The PIC16(L)F720/721 device family features an
interruptible core, allowing certain events to preempt
normal program flow. An Interrupt Service Routine
(ISR) is used to determine the source of the interrupt
and act accordingly. Some interrupts can be configured
to wake the MCU from Sleep mode.
FIGURE 4-1:
INTERRUPT LOGIC
PIC16(L)F720/721
The PIC16(L)F720/721 device family has 12 interrupt
sources, differentiated by corresponding interrupt
enable and flag bits:
• Timer0 Overflow Interrupt
• External Edge Detect on INT Pin Interrupt
• PORTA and PORTB Change Interrupt
• Timer1 Gate Interrupt
• A/D Conversion Complete Interrupt
• AUSART Receive Interrupt
• AUSART Transmit Interrupt
• SSP Event Interrupt
• CCP1 Event Interrupt
• Timer2 Match with PR2 Interrupt
• Timer1 Overflow Interrupt
A block diagram of the interrupt logic is shown in
Figure 4-1.
IOC-RB4
IOCB4
IOC-RB5
IOCB5
IOC-RB6
IOCB6
IOC-RB7
IOCB7
IOC-RA0
IOCA0
IOC-RA1
IOCA1
IOC-RA2
IOCA2
IOC-RA3
IOCA3
IOC-RA4
IOCA4
IOC-RA5
IOCA5
SSPIF
SSPIE
TXIF
TXIE
RCIF
RCIE
TMR2IF
TMR2IE
TMR1IF
TMR1IE
ADIF
ADIE
TMR1GIF
TMR1GIE
CCP1IF
CCP1IE
TMR0IF
TMR0IE
INTF
INTE
RABIF
RABIE
PEIE
GIE
Wake-up (if in Sleep mode)⁽¹⁾
Interrupt to CPU
Note 1:
Some peripherals depend upon the
system clock for operation. Since the
system clock is suspended during
Sleep, these peripherals will not wake
the part from Sleep. See Section 19.1
“Wake-up from Sleep”.
 2011 Microchip Technology Inc.
Preliminary
DS41430B-page 37