PIC16LF720_11 Datasheet, PDF (193/244 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F720/721
23.4 DC Characteristics: PIC16(L)F720/721-I/E (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Sym.
Characteristic
Min.
Typ†
Max. Units
Conditions
Voltage on MCLR/VPP during
8.0
Erase/Program
—
9.0
V ^{Temperature during programming:}
10°C  TA  40°C
D132 VPEW VDD for Write or Row Erase
2
2
—
5.5
V PIC16F720/21
—
3.6
V PIC16LF720/21
IPPPGM* Current on MCLR/VPP during
—
Erase/Write
—
5.0
mA ^{Temperature during programming:}
10°C  TA  40°C
IDDPGM* Current on VDD during Erase/
—
Write
5.0
mA ^{Temperature during programming:}
10°C  TA  40°C
D133 TPEW Erase/Write cycle time
—
2.8
ms Temperature during programming:
10°C  TA  40°C
D134* TRETD Characteristic Retention
40
—
—
Year Provided no other specifications
are violated
Legend: TBD = To Be Determined
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: Negative current is defined as current sourced by the pin.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Including OSC2 in CLKOUT mode.
 2011 Microchip Technology Inc.
Preliminary
DS41430B-page 193