PIC16LF720_11 Datasheet, PDF (190/244 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16(L)F720/721
23.2 DC Characteristics: PIC16(L)F720/721-I/E (Industrial, Extended)
PIC16LF720/721
PIC16F720/721
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D013
—
140
200
A
—
250
330
A
1.8 FOSC = 1 MHz
3.0 ^{EC Oscillator mode}
D013
—
160
260
A
—
280
480
A
1.8 FOSC = 1 MHz
3.0 ^{EC Oscillator mode}
—
390
690
A
5.0
Supply Current (IDD)^{(1, 2)}
D014
—
400
550
A
—
700 1100
A
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode}
D014
—
430
650
A
—
720 1200
A
1.8 FOSC = 4 MHz
3.0 ^{EC Oscillator mode}
—
850 1400
A
5.0
D015
—
110
180
A
—
140
250
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode}
D015
—
150
250
A
—
210
330
A
1.8 FOSC = 500 kHz
3.0 ^{MFINTOSC mode}
—
270
430
A
5.0
D016
—
1.0
1.3
mA
1.8 FOSC = 8 MHz
—
1.8
2.0
mA
3.0 ^{HFINTOSC mode}
D016
—
1.0
1.5
mA
1.8 FOSC = 8 MHz
—
1.8
2.2
mA
3.0 ^{HFINTOSC mode}
—
2.0
2.8
mA
5.0
D017
—
1.5
2.0
mA
1.8 FOSC = 16 MHz
—
2.8
3.5
mA
3.0 ^{HFINTOSC mode}
D017
—
1.7
2.3
mA
1.8 FOSC = 16 MHz
—
2.9
3.9
mA
3.0 ^{HFINTOSC mode}
—
3.1
4.1
mA
5.0
Note 1:
2:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail (except for INTOSC mode); all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
DS41430B-page 190
Preliminary
 2011 Microchip Technology Inc.