|
PIC24HJ256GP210A-I Datasheet, PDF (313/326 Pages) Microchip Technology – 16-bit Microcontrollers with Advanced Analog | |||
|
◁ |
PIC24HJXXXGPX06A/X08A/X10A
Revision C (March 2011)
This revision includes typographical and formatting
changes throughout the data sheet text. In addition, all
occurrences of VDDCORE have been removed.
All other major changes are referenced by their
respective section in the following table.
TABLE B-2: MAJOR SECTION UPDATES
Section Name
Section 2.0 âGuidelines for Getting Started
with 16-Bit Microcontrollersâ
Update Description
The frequency limitation for device PLL start-up conditions was
updated in Section 2.7 âOscillator Value Conditions on Device
Start-upâ.
Section 4.0 âMemory Organizationâ
Section 9.0 âOscillator Configurationâ
The second paragraph in Section 2.9 âUnused I/Osâ was updated.
The All Resets values for the following SFRs in the Timer Register
Map were changed (see Table 4-6):
⢠TMR1
⢠TMR2
⢠TMR3
⢠TMR4
⢠TMR5
⢠TMR6
⢠TMR7
⢠TMR8
⢠TMR9
Added Note 3 to the OSCCON: Oscillator Control Register (see
Register 9-1).
Added Note 2 to the CLKDIV: Clock Divisor Register (see
Register 9-2).
Added Note 1 to the PLLFBD: PLL Feedback Divisor Register (see
Register 9-3).
Section 20.0 â10-bit/12-bit Analog-to-Digital
Converter (ADC)â
Section 21.0 âSpecial Featuresâ
Added Note 2 to the OSCTUN: FRC Oscillator Tuning Register (see
Register 9-4).
Updated the VREFL references in the ADC1 module block diagram
(see Figure 20-1).
Added a new paragraph and removed the third paragraph in
Section 21.1 âConfiguration Bitsâ.
Added the column âRTSP Effectsâ to the Configuration Bits
Descriptions (see Table 21-2).
ï£ 2009-2012 Microchip Technology Inc.
DS70592D-page 313
|
▷ |