PIC24HJ256GP210A-I Datasheet, PDF (247/326 Pages) Microchip Technology – 16-bit Microcontrollers with Advanced Analog

PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter No.
Typical⁽²⁾
Max
Doze
Ratio
Units
Conditions
Doze Current (IDOZE)⁽¹⁾
DC73a
11
35
1:2
mA
DC73f
11
30
1:64
mA
-40°C 3.3V
40 MIPS
DC73g
11
30
1:128
mA
DC70a
42
50
1:2
mA
DC70f
26
30
1:64
mA
+25°C 3.3V
40 MIPS
DC70g
25
30
1:128
mA
DC71a
41
50
1:2
mA
DC71f
25
30
1:64
mA
+85°C 3.3V
40 MIPS
DC71g
24
30
1:128
mA
DC72a
42
50
1:2
mA
DC72f
26
30
1:64
mA
+125°C 3.3V
40 MIPS
DC72g
25
30
1:128
mA
Note 1: IDOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square
wave from rail-to-rail with overshoot/undershoot < 250 mV
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.
 2009-2012 Microchip Technology Inc.
DS70592D-page 247