PIC24HJ256GP210A-I Datasheet, PDF (244/326 Pages) Microchip Technology – 16-bit Microcontrollers with Advanced Analog

PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.⁽³⁾
Typical⁽²⁾
Max
Units
Conditions
Operating Current (IDD)⁽¹⁾
DC20d
27
30
mA
-40°C
DC20a
DC20b
27
30
mA
27
30
mA
+25°C
+85°C
3.3V
10 MIPS
DC20c
27
35
mA
+125°C
DC21d
36
40
mA
-40°C
DC21a
DC21b
37
40
mA
38
45
mA
+25°C
+85°C
3.3V
16 MIPS
DC21c
39
45
mA
+125°C
DC22d
43
50
mA
-40°C
DC22a
DC22b
46
50
mA
46
55
mA
+25°C
+85°C
3.3V
20 MIPS
DC22c
47
55
mA
+125°C
DC23d
65
70
mA
-40°C
DC23a
DC23b
65
70
mA
65
70
mA
+25°C
+85°C
3.3V
30 MIPS
DC23c
65
70
mA
+125°C
DC24d
84
90
mA
-40°C
DC24a
DC24b
84
90
mA
84
90
mA
+25°C
+85°C
3.3V
40 MIPS
DC24c
84
90
mA
+125°C
Note 1: IDD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDD measurements are as follows:
• Oscillator is configured in EC mode with PLL, OSC1 is driven with external square wave from
rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to VSS
• MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: These parameters are characterized but not tested in manufacturing.
3: Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.
DS70592D-page 244
 2009-2012 Microchip Technology Inc.