PIC24HJ256GP210A-I Datasheet, PDF (220/326 Pages) Microchip Technology – 16-bit Microcontrollers with Advanced Analog

PIC24HJXXXGPX06A/X08A/X10A
REGISTER 20-10: ADxPCFGL: ADCx PORT CONFIGURATION REGISTER LOW^(1,2,3,4)
R/W-0
PCFG15
bit 15
R/W-0
PCFG14
R/W-0
PCFG13
R/W-0
PCFG12
R/W-0
PCFG11
R/W-0
PCFG10
R/W-0
PCFG9
R/W-0
PCFG8
bit 8
R/W-0
PCFG7
bit 7
R/W-0
PCFG6
R/W-0
PCFG5
R/W-0
PCFG4
R/W-0
PCFG3
R/W-0
PCFG2
R/W-0
PCFG1
R/W-0
PCFG0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-0
PCFG<15:0>: ADC Port Configuration Control bits
1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AVSS
0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage
Note 1:
2:
3:
4:
On devices without 16 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on
ports without a corresponding input on device.
On devices with 2 analog-to-digital modules, both AD1PCFGL and AD2PCFGL will affect the configuration
of port pins multiplexed with AN0-AN15.
PCFGx = ANx, where x = 0 through 15.
PCFGx bits will have no effect if ADC module is disabled by setting ADxMD bit in the PMDx register. In this
case all port pins multiplexed with ANx will be in Digital mode.
DS70592D-page 220
 2009-2012 Microchip Technology Inc.