|
PIC24HJ256GP210A-I Datasheet, PDF (283/326 Pages) Microchip Technology – 16-bit Microcontrollers with Advanced Analog | |||
|
◁ |
PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-42: ADC CONVERSION (12-BIT MODE) TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ï£ TA ï£ +85°C for Industrial
-40°C ï£ TA ï£ +125°C for Extended
Param
No.
Symbol
Characteristic
Min. Typ(2) Max. Units
Conditions
Clock Parameters(1)
AD50 TAD
ADC Clock Period
117.6
â
â
ns
â
AD51 tRC
ADC Internal RC Oscillator
â
250
â
ns
â
Period
Conversion Rate
AD55 tCONV Conversion Time
â 14 TAD
ns
â
AD56 FCNV
Throughput Rate
â
â
500 ksps
â
AD57 TSAMP Sample Time
3 TAD
â
â
â
â
AD60 tPCS
Timing Parameters
Conversion Start from Sample
Trigger(2)
2.0 TAD
â 3.0 TAD â Auto convert trigger not
selected
AD61 tPSS
Sample Start from Setting
2.0 TAD â 3.0 TAD â
â
Sample (SAMP) bit(2)
AD62 tCSS
Conversion Completion to
â 0.5 TAD â
â
â
Sample Start (ASAM = 1)(2)
AD63 tDPU
Time to Stabilize Analog Stage
â
â
20
ïs
â
from ADC Off to ADC On(2,3)
Note 1: Because the sample caps eventually loses charge, clock rates below 10 kHz may affect linearity
performance, especially at elevated temperatures.
2: These parameters are characterized but not tested in manufacturing.
3: tDPU is the time required for the ADC module to stabilize when it is turned on (AD1CON1<ADON> = 1).
During this time, the ADC result is indeterminate.
ï£ 2009-2012 Microchip Technology Inc.
DS70592D-page 283
|
▷ |