PIC16F737-I Datasheet, PDF (229/276 Pages) Microchip Technology – 28/40/44-Pin, 8-Bit CMOS Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC16F7X7
FIGURE 18-10: CAPTURE/COMPARE/PWM TIMINGS (CCP1 AND CCP2)
RC1/T1OSI/CCP2
and RC2/CCP1
(Capture Mode)
50
51
52
RC1/T1OSI/CCP2
and RC2/CCP1
(Compare or PWM Mode)
53
54
Note: Refer to Figure 18-4 for load conditions.
TABLE 18-8: CAPTURE/COMPARE/PWM REQUIREMENTS (ALL CCP MODULES)
Param
No.
Symbol
Characteristic
Min
Typ† Max Units Conditions
50* TCCL
CCP1, CCP2 and No prescaler
CCP3 Input Low _{With prescaler PIC16F7X7}
Time
PIC16LF7X7
0.5 TCY + 20 — — ns
10
— — ns
20
— — ns
51* TCCH CCP1, CCP2 and No prescaler
CCP3 Input High _{With prescaler PIC16F7X7}
Time
PIC16LF7X7
0.5 TCY + 20 — — ns
10
— — ns
20
— — ns
52* TCCP CCP1, CCP2 and CCP3 Input Period
3 TCY + 40 — — ns N = prescale
N
value (1, 4 or 16)
53* TCCR CCP1, CCP2 and CCP3 Output PIC16F7X7
Rise Time
PIC16LF7X7
—
10 25 ns
—
25 50 ns
54* TCCF CCP1, CCP2 and CCP3 Output PIC16F7X7
Fall Time
PIC16LF7X7
—
10 25 ns
—
25 45 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and
are not tested.
 2004 Microchip Technology Inc.
DS30498C-page 227