PIC16F737-I Datasheet, PDF (15/276 Pages) Microchip Technology – 28/40/44-Pin, 8-Bit CMOS Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC16F7X7
TABLE 1-3: PIC16F747 AND PIC16F777 PINOUT DESCRIPTION (CONTINUED)
Pin Name
PDIP QFN TQFP I/O/P
Pin # Pin # Pin # Type
Buffer
Type
Description
PORTC is a bidirectional I/O port.
RC0/T1OSO/T1CKI
RC0
T1OSO
T1CKI
15
34
32
ST
I/O
O
I
Digital I/O.
Timer1 oscillator output.
Timer1 external clock input.
RC1/T1OSI/CCP2
RC1
T1OSI
CCP2⁽⁵⁾
16
35
35
ST
I/O
I
I/O
Digital I/O.
Timer1 oscillator input.
Capture 2 input, Compare 2 output, PWM 2 output.
RC2/CCP1
RC2
CCP1
17
36
36
ST
I/O
I/O
Digital I/O.
Capture 1 input, Compare 1 output, PWM 1 output.
RC3/SCK/SCL
RC3
SCK
SCL
18
37
37
ST
I/O
I/O
I/O
Digital I/O.
Synchronous serial clock input/output
for SPI™ mode.
Synchronous serial clock input/output
for I²C™ mode.
RC4/SDI/SDA
RC4
SDI
SDA
23
42
42
ST
I/O
I
I/O
Digital I/O.
SPI data in.
I²C data I/O.
RC5/SDO
RC5
SDO
24
43
43
ST
I/O
O
Digital I/O.
SPI data out.
RC6/TX/CK
RC6
TX
CK
25
44
44
ST
I/O
O
I/O
Digital I/O.
AUSART asynchronous transmit.
AUSART synchronous clock.
RC7/RX/DT
RC7
RX
DT
26
1
1
ST
I/O
I
I/O
Digital I/O.
AUSART asynchronous receive.
AUSART synchronous data.
Legend:
Note 1:
2:
3:
4:
5:
I = input
O = output
I/O = input/output
P = power
— = Not used
TTL = TTL input
ST = Schmitt Trigger input
This buffer is a Schmitt Trigger input when configured as an external interrupt.
This buffer is a Schmitt Trigger input when used in Serial Programming mode.
This buffer is a Schmitt Trigger input when configured as a general purpose I/O and a TTL input when used in the Parallel
Slave Port mode (for interfacing to a microprocessor bus).
This buffer is a Schmitt Trigger input when configured in RC Oscillator mode and a CMOS input otherwise.
Pin location of CCP2 is determined by the CCPMX bit in Configuration Word Register 1.
 2004 Microchip Technology Inc.
DS30498C-page 13