PIC16LF1508 Datasheet, PDF (226/384 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1508/9
FIGURE 21-34:
BUS COLLISION DURING START CONDITION (SCLX = 0)
SDAx = 0, SCLx = 1
SDAx
TBRG
TBRG
SCLx
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
SEN
BCLxIF
SCLx = 0 before BRG time-out,
bus collision occurs. Set BCLxIF.
S
’0’
SSPxIF ^{’0’}
SCLx = 0 before SDAx = 0,
bus collision occurs. Set BCLxIF.
Interrupt cleared
by software
’0’
’0’
FIGURE 21-35: BRG RESET DUE TO SDA ARBITRATION DURING START CONDITION
SDAx
SDAx = 0, SCLx = 1
Set S
Less than TBRG
TBRG
SDAx pulled low by other master.
Reset BRG and assert SDAx.
Set SSPxIF
SCLx
SEN
BCLxIF
S
SCLx pulled low after BRG
time-out
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
’0’
S
SSPxIF
SDAx = 0, SCLx = 1,
set SSPxIF
Interrupts cleared
by software
DS41609A-page 226
Preliminary
 2011 Microchip Technology Inc.