PIC16LF1508 Datasheet, PDF (13/384 Pages) Microchip Technology – 20-Pin Flash, 8-Bit Microcontrollers with nanoWatt XLP Technology

PIC16(L)F1508/9
TABLE 1-2: PIC16(L)F1508/9 PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
RC5/PWM1/CLC1⁽²⁾/
CWG1A
RC5
PWM1
TTL CMOS General purpose I/O.
— CMOS PWM output.
CLC1
— CMOS Configurable Logic Cell source output.
RC6/AN8/NCO1⁽²⁾/CLC3IN1/
SS⁽¹⁾
CWG1A
RC6
AN8
— CMOS CWG primary output.
TTL CMOS General purpose I/O.
AN
— A/D Channel input.
NCO1
— CMOS Numerically Controlled Oscillator source output.
CLC3IN1 ST
— Configurable Logic Cell source input.
SS
ST
— Slave Select input.
RC7/AN9/CLC1IN1/SDO
RC7
TTL CMOS General purpose I/O.
AN9
AN
— A/D Channel input.
CLC1IN1 ST
— Configurable Logic Cell source input.
SDO
— CMOS SPI data output.
VDD
VDD
Power — Positive supply.
VSS
VSS
Power — Ground reference.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
2: Alternate location for peripheral pin function selected by the APFCON register.
 2011 Microchip Technology Inc.
Preliminary
DS41609A-page 13