PIC24HJ16GP304-E Datasheet, PDF (194/274 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers

PIC24HJ32GP202/204 AND PIC24HJ16GP304
TABLE 22-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
Standard Operating Conditions: 3.0V to 3.6V
DC CHARACTERISTICS
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Operating Current (IDD)⁽²⁾
DC20d
20
30
mA
-40°C
DC20a
DC20b
19
22
mA
19
25
mA
+25°C
+85°C
3.3V
10 MIPS⁽³⁾
DC20c
19
30
mA
+125°C
DC21d
28
40
mA
-40°C
DC21a
DC21b
DC21c
27
30
mA
27
32
mA
27
36
mA
+25°C
+85°C
+125°C
3.3V
16 MIPS⁽³⁾
DC22d
33
50
mA
-40°C
DC22a
DC22b
33
40
mA
33
40
mA
+25°C
+85°C
3.3V
20 MIPS⁽³⁾
DC22c
33
50
mA
+125°C
DC23d
44
60
mA
-40°C
DC23a
DC23b
43
50
mA
42
55
mA
+25°C
+85°C
3.3V
30 MIPS⁽³⁾
DC23c
DC24d
41
65
mA
55
75
mA
+125°C
-40°C
DC24a
DC24b
54
65
mA
52
70
mA
+25°C
+85°C
3.3V
40 MIPS
DC24c
51
80
mA
+125°C
Note 1:
2:
3:
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VSS.
MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating; however, every peripheral is being clocked (PMD bits
are all zeroed).
These parameters are characterized, but are not tested in manufacturing.
DS70289H-page 194
© 2007-2011 Microchip Technology Inc.