PIC16F872 Datasheet, PDF (159/160 Pages) Microchip Technology – 28-Pin, 8-Bit CMOS FLASH Microcontroller

PIC16F872
PIC16F872 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
-X
/XX
Device Temperature Package
Range
XXX
Pattern
Device
PIC16F872, PIC16F872T;VDD range 4.0V to 5.5V
PIC16LF872, PIC16LF872T;VDD range 2.0V to 5.5V
F
= CMOS FLASH
LF = Low Power CMOS FLASH
T
= in tape and reel - SOIC, SSOP,
packages only.
Examples:
a) PIC16F872-I/SP 301 = Industrial temp., PDIP
package, 20MHz, normal VDD limits, QTP pat-
tern #301.
b) PIC16F872-I/SO = Industrial temp., SOIC
package, 20 MHz, normal VDD limits.
c) PIC16F872/P = Industrial temp., PDIP pack-
age, 10MHz, normal VDD limits.
d) PIC16LF872-I/SS = Industrial temp., SSOP
package, DC - 20MHz, extended VDD limits.
Temperature Range blank = 0°C to 70°C (Commercial)
I
= -40°C to +85°C (Industrial)
Package
SO = SOIC
SP = Skinny plastic dip
SS = SSOP
Pattern
QTP, SQTP, Code or Special Requirements
(blank otherwise)
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
© 1999 Microchip Technology Inc.
Preliminary
DS30221A-page 159