PIC18F2X1X Datasheet, PDF (15/380 Pages) Microchip Technology – 28/40/44-PIN FLASH MICROCONTROLLERS WITH 10-BIT A/D AND NANO WATT TECHNOLOGY

PIC18F2X1X/4X1X
TABLE 1-3: PIC18F2410/2510/2515/2610 PINOUT I/O DESCRIPTIONS
Pin Name
Pin Number
Pin Buffer
SPDIP,
SOIC
QFN
Type
Type
Description
MCLR/VPP/RE3
MCLR
VPP
RE3
1
26
Master Clear (input) or programming voltage (input).
I ST Master Clear (Reset) input. This pin is an active-low
Reset to the device.
P
Programming voltage input.
I ST Digital input.
OSC1/CLKI/RA7
OSC1
CLKI
RA7
9
6
Oscillator crystal or external clock input.
I ST
Oscillator crystal input or external clock source input.
ST buffer when configured in RC mode; CMOS otherwise.
I CMOS External clock source input. Always associated with pin
function OSC1. (See related OSC1/CLKI, OSC2/CLKO
pins.)
I/O TTL
General purpose I/O pin.
OSC2/CLKO/RA6
OSC2
CLKO
RA6
10
7
Oscillator crystal or clock output.
O—
Oscillator crystal output. Connects to crystal or
resonator in Crystal Oscillator mode.
O—
In RC mode, OSC2 pin outputs CLKO, which has 1/4 the
frequency of OSC1 and denotes the instruction cycle rate.
I/O TTL General purpose I/O pin.
Legend: TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels I
= Input
O = Output
P
= Power
Note 1: Default assignment for CCP2 when configuration bit CCP2MX is set.
2: Alternate assignment for CCP2 when configuration bit CCP2MX is cleared.
 2004 Microchip Technology Inc.
Preliminary
DS39636A-page 13