MAX1463 Datasheet, PDF (32/49 Pages) Maxim Integrated Products – Low-Power Two-Channel Sensor Signal Processor

Low-Power Two-Channel Sensor
Signal Processor
Table 7. Single Ended (SE[3:0])
SE[3:0]
0001
0010
0011
0100
0101
0110
PGA
RANGE
0.94
0.94–240
0.94–240
0.7*
0.7*
0.7*
ADC
+INPUT
VBG
OUTnSM
OUTnLG
V_DD
V_SS
DACn_OUT using
OUTnSM
ADC
-INPUT
V_SS
V_SS
V_SS
V_SS
V_SS
V_SS
DESCRIPTION
Bandgap voltage
Output of small op-amp n
Output of large op-amp n
Power-supply voltage
Power-supply ground
DACn output through small op-amp n configured
as unity-gain buffer
0111
0.7*
DACn_OUT using
OUTnLG
V_SS
DACn output through large op-amp n configured
as unity-gain buffer
1000
1001
0.94–240
0.94–240
INPn
INMn
V_SS
Single-ended input on INPn
V_SS
Single-ended input on INMn
*The PGA operates at a fixed reduced gain of 0.7V/V to enable conversion of input signals at and near V_DD and V_SS. This gain set-
ting is not selectable.
Table 8. ADC_Config_1A (Address = 02h)
BIT
15–11
10–8
7
6-4
3
2-0
NAME
PGA1[4:0]
CLK1[2:0]
—
RES1[2:0]
CO1[3]
CO1[2:0]
DESCRIPTION
Programmable gain amplifier setting to use during conversion of channel 1. PGA1[4] = MSB.
ADC clock setting to use during conversion of channel 1. CLK1[2] = MSB.
Unused.
ADC resolution setting to use during conversion of channel 1. RES1[2] = MSB.
Coarse-offset sign bit.
Coarse-offset DAC setting to use during conversion of channel 1. CO1[2] = MSB.
Table 9. ADC_Config_1B (Address = 03h)
BIT
15–7
6–4
3–2
1–0
NAME
—
BIAS1[2:0]
—
REF1[1:0]
DESCRIPTION
Unused.
ADC bias setting to use during conversion of channel 1. BIAS1[2] = MSB.
Unused.
Reference select for conversion on channel 1. REF1[1] = MSB.
Table 10. ADC_Config_2A (Address = 05h)
BIT
15–1
10–8
7
6
3
2–0
NAME
PGA2[4:0]
CLK2[2:0]
—
RES2[2:0]
CO2[3]
CO2[2:0]
DESCRIPTION
Programmable gain amplifier to use during conversion of channel 2. PGA[4] = MSB.
ADC clock setting to use during conversion of channel 2. CLK2[2] = MSB.
Unused.
ADC resolution setting to use during conversion of channel 2. RES2[2] = MSB.
Coarse-offset DAC sign bit.
Coarse-offset DAC setting to use during conversion of channel 2. CO2[2] = MSB.
32 ______________________________________________________________________________________