1055497-1 Datasheet, PDF (266/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
Application Tooling (Continued)
Hand Tools
Tyco Electronics PRO-CRIMPER II Hand Tools are econ-
omy versions of our Tyco Electronics CERTI-CRIMP Hand
Tools, featuring ratcheted crimp control to provide full
die closure and help eliminate partial crimps. With an all
new design, the PRO-CRIMPER II hand tools require dra-
matically less hand force to produce the same connection
as comparable tools. Dies are interchangeable. It’s the
most versatile and reliable crimping tool in the mid-price
class. Recommended for networking installations, and
commercial, industrial and institutional maintenance work.
See Catalog 82276 for further information.
Typical PRO-CRIMPER III Hand Tool
No. 58433-1
for 50 Ohm BNC Dual
“O” Crimp Commercial
Connectors
Tyco Electronics CERTI-CRIMP Hand Tools are our top-of-
the-line crimping tools featuring the original ratcheted crimp
control. All tools are designed to exacting specifications, and
manufactured using the highest quality materials to provide
long service life. Recommended for low production runs,
repairs and prototype work, and applications requiring con-
sistent, highly-reliable terminations. See Catalog 65780 for
further information.
Typical CERTI-CRIMP Hand Tools with Integral
(Non-Interchangeable) Dies
No. 69477-1
for 50 Ohm BNC
Dual Crimp MIL Type
Connectors
No. 220015-1
for 50 Ohm N
Connectors
Pneumatic Tools
The 626 Pneumatic Tool System, as the name implies, will
apply a broad range of products in the 6-26 AWG [13-0.12
mm²] wire range. A basic 626 Pneumatic Tool System
requires a power unit, a tool holder, a crimp head assembly
and a die set when applicable. This premium system is well
suited for low- to medium- volume production and harness
assembly operations. Since the crimp head can be rotated
to any angle, the operator can also work on more difficult
terminations in confined equipment cabinets or enclosures.
Interchangeable tool holder assemblies and crimping
heads are available to crimp a variety of products.
Crimping heads for the earlier Model 2614 pneumatic
power unit can be used with the 626 Pneumatic Tool
System. If you are already using Tyco Electronics hand
tools, many crimp heads and die sets can be removed,
attached to an adapter with quick
pins and used with the
626 Pneumatic Tool
System. An
adapter is even
available to
accept lower
cost die sets of
the PRO-CRIMPER
II hand tool. For
more information,
order catalog 124208.
No. 189721-1
Bench Mount Assembly for
Pneumatic Tool System
(Optional)
Fully adjustable stand allows
operator free use of both
hands — recommended for
maximum productivity.
No. 856402-1
Battery Powered Crimp Tool
CERTI-CRIMP Hand Tool with Interchangeable Dies
No. 69710
Take automatic crimping
away from the bench to the
product, with this convenient,
portable, battery-operated
tool. It’s at home in the
factory or in the field.
• Completely portable—
performs about 100
crimps per charge
• Terminates wires to 10
AWG [6 mm²]
• Weighs only 1.57 kg [3.46
lb] including battery; 360
mm [14.2 in] long
• Pressure-sensitive cycle
control
• Kit includes tool, 2 batter-
ies, and charger
266
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Part Number 1725837-1
Part Number 1213890-1
(Open Barrel)
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208