1055497-1 Datasheet, PDF (169/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors
Product Facts
■ Subminiature version of
OSP Blind Mate Connectors
■ For space savings
■ Family of connectors and
adapters
OSSP connectors are a sub-
miniature version of the OSP
blind mate series.
Connectors in this series
incorporate the design ele-
ments of the OSP interface
including the float and mis-
mate features. OSSP blind
mates are about 40%
smaller than OSP connec-
tors and are designed to be
Engineering Data
Impedance —
Frequency —
Temperature Rating —
50 ohms
dc to 28.0 GHz
-65° to 125° C
Electrical
VSWR —
RF Transmission Loss —
Insulation Resistance —
Contact Resistance —
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage —
Corona Extinction Voltage at 70,000 Ft.—
RF High Potential at 5 MHz —
RF Leakage Interface Only —
Power Handling —
RG 405 (.085) Semi-Rigid
1.05 + .01f (GHz)
.040 x √^-f- (GHz)
5,000 megohms min.
6.0 milliohms max.
3.0 milliohms max.
0.5 milliohms max.
675 volts RMS
250 volts min.
675 volts RMS
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room
temperature
Environmental
Corrosion —
Vibration —
Shock —
Temperature Cycling —
Moisture Resistance —
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20G’s, MIL-STD-202
Method 213, Condition I, 100G’s, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Material
Housing —
Center Contact —
Dielectric —
Gasket (O’Ring) —
Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
used in applications where
space is at a premium.
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will func-
tion to specifications up to
±.064 [±.0025] radial mis-
alignment with the mating
plug connector.
Applications requiring
greater than ±.064 [±.0025]
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
Mechanical
Force to Engage —
Force to Disengage —
Center Contact Retention —
Durablilty —
Radial Misalignment —
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
4 pounds min.
1,000 Cycles
±.06 [±.0025]
±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin — .533 + .003 [.0210 + .0001] dia.
Test Pin Finish — 16 micro inch max.
Insertion Depth — .76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force
Test Pin —
Test Pin Finish —
Insertion Force —
.528 + .003 [.0208 + .0001] dia.
16 micro inch
3 pounds max.
Withdrawal Force
Test Pin —
Test Pin Finish —
Insertion Depth —
Withdrawal —
.495 + .003 [.0195 - .0001] dia.
16 micro inch max.
1.27/1.91 [.050/.075]
1/2 ounce min.
Finish
Center Contact —
Housing —
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
169
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208