1055497-1 Datasheet, PDF (207/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
SMT/QuickGrip Connectors
Product Facts
■ Solderless Cable
Termination
■ 3.0 [.118] Mated Height
■ Excellent Cable Retention
■ Usable With Flexible and
Semi-Rigid Micro-Coaxial
Cables
■ Tape and Reel Packaging
Tyco Electronics revolution-
ary SMT/QuickGrip product
line is designed to meet the
growing demand for a reli-
able, low cost system for
direct termination of coax to
a printed circuit board
(PCB). SMT/QuickGrip
technology eliminates the
requirement to connectorize
the coaxial cable, reduc-
ing assembly times and,
therefore, cost. The
SMT/QuickGrip surface
mount device occupies less
PCB area than conventional
through hole coaxial con-
nectors. An innovative
microstrip mounting pattern
and cable receptacle
design ensures excellent
grounding and PCB reten-
tion. The SMT/QuickGrip
cable termination system
stands a mere 3.0 [.118] off
the board when mated,
allowing for closer pitch/
spacing when designing a
system. The SMT/QuickGrip
design provides optimal
cable retention for applica-
tions where shock, vibra-
tion, and/or cable flexure
may be encountered. This
unique RF design accepts
both flexible and semi-rigid
micro-coaxial cables while
delivering exceptional RF
performance up to 3GHz.
These features make this
system extremely versatile
for design engineers and
offer a reliable, cost effective
alternative to direct solder-
ing of cable to the PCB. The
cable is inserted into the
device by means of a sim-
ple self-aligning hand tool,
eliminating the requirement
for skilled personnel. This
system removes the possi-
bility of damaged PCBs and
cables which are common
quality issues associated
with direct solder, while pro-
viding superior RF perform-
ance. The SMT/QuickGrip
accommodates multiple
cable insertions allowing
easy replacement of cables
for repairs. This receptacle
is designed for high volume
assembly using surface
mount technology and is
available in tape and reel
packaging for pick and
place board assembly. Pre-
stripped cables and inter-
series cable pigtails are
available as turnkey solu-
tions for your application
needs (i.e.: for use in
multi-board applications, for
connecting antennas to the
PCB, or point to point trans-
mission on the same PCB).
The SMT/QuickGrip cable
termination system is ideal
for wireless surface mount
applications in handsets,
pagers and personal
digital assistants (PDA).
The SMT/QuickGrip
mechanical and electrical
performance, coupled with
its ease of use, ensure it to
be a high quality, reliable
solution for current and
future interconnect needs.
Tyco Electronics is an
ISO9001 certified manufac-
turer and maintains an SPC
controlled manufacturing
environment. Please call
your local Sales or
Distribution office for
additional information and
qualification samples today.
6.4
[.250]
Ref.
3.2
[.120]
Ref.
Cable Jacket
Cable Braid
Cable Conductor
Cable Dielectric
3.0
[.120]
Ref.
PWB
2.1 _Ref.
[.083]
PWB
3.0
[.120]
Ref.
1.3
1.26
1.22
1.18
1.14
1.1
0.3 0.6 0.9 1.2 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz)
Typical VSWR using SMT/QuickGrip with Omni-Flex 200 Cable
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
207
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208