1055497-1 Datasheet, PDF (238/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
DIN Inserts
Product Facts
■ Meets requirements of DIN
41626 and CECC 22330
■ Suitable for DIN 41612 Type
M Connectors (Eurocard),
Siedecon, and Z-PACK 2mm
HM Connectors
■ Meets DIN Performance
Level II
■ Crimp termination for inner
and outer conductors (cable
mount only) eliminates the
need for solder
■ Right-angle and vertical
style board mount pin and
socket contacts
■ Board mount product avail-
able with both solder and
compliant tails
■ Straight cable mount pin
and socket contacts for
RG 316, and RG 179 cable
■ Contact impedance of 50
and 75 ohms for cable
mount and 50 ohms for
board mount
Coaxial inserts according
to CECC 22 330 and high-
current inserts (CECC spec-
ification under preparation)
can be used in conjunction
with a DIN 41612 style M
contact base (CECC 75
101-801), SIEDECON,
and Z-PACK 2mm HM
connectors.
Coaxial inserts have a con-
tact system based on the
pin-socket principle with the
same dimensions as the
Series 1.0/2.3 coaxial con-
nectors and are plug-com-
patible. The product family
is represented by various
50Ω and 75Ω styles that can
be used far into the GHz
range. The high mounting
density (pitch between adja-
cent contacts starting at 7.5
mm) and installation into the
contact base, by means of
a “snap-in” lock, make the
inserts particularly well
suited for applications.
Due to the centering,
– coaxial plugs are
installed in contact bases
with audio-frequency
(AF) female contacts
– coaxial jacks are
installed in contact bases
with AF male contacts.
The high-quality materials
used with coaxial inserts
ensure a high grade of
service even in an industrial
atmosphere.
Technical Data
Electrical and mechanical
characteristics of coaxial
inserts in accordance with DIN
41626 Part 2 and CECC 22 330
Characteristic Impedance —
50/75 Ω
Frequency Range — up to 2 GHz
Reflection Factor Up To 2 GHz ¹ —
≤ 0.10
Insulation Resistance —
Initial value — ≥ 1 GΩ
After stressing — ≥ 200 MΩ
Screening Effectiveness — ≥ 70 dB
Inner Conductor Contact Resistance
After Stressing — ≤ 10 mΩ
Outer Conductor Continuity After
Stressing — ≤ 7.5 mΩ
Voltage Proof ² —
Flexible Cables (RG 316)
At sea level — 750 V, 50 Hz
At 20 km altitude — 150 V, 50 Hz
Working Voltage ² —
Flexible Cables (RG 316)
At sea level — 350 V, 50 Hz
At 20 km altitude — 65 V, 50 Hz
Service Life — 500 cycles
Climatic Category — 55/125/56
Notes
1 Guideline dimensions, depending
on cable type and connector style.
2 Some cable types suitable for use
with these connectors have lower
characteristic values than speci-
fied here.
238
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208