1055497-1 Datasheet, PDF (265/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
Application Tooling (Continued)
Setting Gauge
Protective Caps/Setting
Gauges
The setting gauges are used
to position coaxial jacks and
pre-mating high-current
plugs on male connectors
DIN 41612 M if the pins are
flow-soldered into PC boards.
The gauges are held by
clamping in connector
body and protect the blade
contacts.
The gauges provide
protection
— during transport (if the
male connectors have
already been removed
from the packaging),
— during assembly,
— against soiling,
— during soldering.
Male Connector DIN 41612M
PC Board
Setting
Gauge
ECN1225-P
Item
Part No.
Setting gauge for types M 1393494-9
M/2 1-1393494-0
M/3 1-1393494-1
Note: These gauges can also be used to pro-
tect types C, C/2, C/3 and D.
Wrench
Ø 5.6
[0.22]
Ø 6.7
[0.26]
1.0
[0.04]
50.0
[1.97]
Used to tighten the threaded ring on bulkhead
jacks Series 1.0/2.3
1.0
[0.04]
Item
Wrench
Part No.
1393488-3
Ø 6.1
[0.24]
Ø 7.3
[0.29]
1.2
[0.05]
50.0
[1.97]
Used to tighten the threaded ring on bulkhead
jack 1393670-8.
1.5
[0.06]
Item
Wrench
Part No.
1393488-4
0.9
[0.04]
Ø 11.0 Ø 0.91
[0.43] [0.36]
40.0
[1.57]
50.0
[1.97]
Movable
50.0
[1.97]
Used to tighten the threaded rings 1-1393562-0
on bulkhead jacks Series 1.6/5.6.
Item
Wrench
Part No.
1393524-1
1.35
[0.05]
ECN1230-Q
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
265
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208