1055497-1 Datasheet, PDF (14/320 Pages) Tyco Electronics – RF Coax Products

Specifications
N Series Jack to SMA
Bulkhead Jack Adapter
RF Coax Connectors
Surge Protectors (Continued)
sparkover voltage. This capacity is quoted
as follows:
Characteristic
d.c.
sparkover
voltage
Symbol Definition
U_zstat
Static
voltage
threshold
Impulse
Typical
Value
n/a 230V
In these applications it is important to
select a device that will assure the tube
can return to its inactive state after the
passage of a surge. This feature of the
Surge protector is known as the holdover
voltage. If the device continues to conduct,
the protected line will be short circuited
and the tube will heat up (glow mode). If
left in this state, the tube can overheat and
destruct. GDT’s have a finite life span which
is inversely proportional to the energy
dissipated. At extremes it is possible to
reach a level where the tube is unable to
discharge all the energy and is destroyed.
It is therefore necessary to schedule rou-
tine maintenance checks and periodically
replace the tube within the surge protector.
Surge protectors offer excellent lightning
protection for broadband systems and are
usable up to 3 GHz. Standard interfaces
include 7-16, N, and SMA. Configurations
include straight and bulkhead mounted
adapters which allows for ease of assimila-
tion into existing systems.
Requirement
Electrical
Frequency Range
Impedance
VSWR Performance
Insertion Loss (Typical)
Impulse Discharge Current (8/20µs, multiple strike)
Maximum Impulse Discharge Current (8/20µs, single strike)
Dynamic Sparkover Voltage, NEMP (1kV/µs)
Dynamic Sparkover Voltage, LEMP (1kV/µs)
Dynamic Sparkover Voltage, Static (<100V/µs)
Materials
Body Parts
Gaskets
Female Contacts
Male Contacts
Insulators
Environmental
Operating Temperature Range
Relative Humidity
Detail
DC to 3GHz
50Ω
≤ 1.33:1
0.45dB
20kA
50kA
2,000V
800V
90V*
Brass
Silicone Rubber
Beryllium Copper
Brass
P.T.F.E.
-45° C to +85° C
up to 100%
* Determined by gas tube used, can be higher than value shown.
53.8 _Ref.
[2.12]
21.5
[0.85]
Ref.
Part Number
6312079-1
25.4
[1.00]
Sq.
13.6
[0.54]
16.0
[0.63]
Dia.
14.0
[0.55]
Recommended
Mounting Hole
Frequency Range DC to 3GHz
Contact Plating Gold
Body Plating White Bronze
Max Panel
10.00mm
Compliant With CECC22210/
CEC22110
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm both ends
Endurance
500 Matings
14
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Note: Part Numbers are RoHS compliant except: ࡗ Indicates non-RoHS compliant.
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208