1055497-1 Datasheet, PDF (228/320 Pages) Tyco Electronics – RF Coax Products

Application Notes
Mating/Unmating —
Cable Plugs
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Pulling Tool
Step 1
Step 2
Receptacle
2N Max.
Printed Circuit Board
2N Max.
RF Coax Cable
4N Max.
Mating/Unmating
1. To mate the connectors,
insert the cable plug into
the SMT receptacle, mak-
ing sure the cable plug
is as vertical as possible
and the mating axis of
both connectors are
aligned. Do not insert on
an extreme angle.
2. To unmate the connectors,
insert the end portion of
the extraction tool under
the SMT receptacle con-
nector flanges and pull off
vertically in the direction
of the mating axis.
Permissible Load
Do not apply excessive
load to the cable after the
connectors are mated.
Please refer to the permissi-
ble loads indicated in the
figure to the right.
Tape and Reel Packaging
Specifications
Standard Receptacles
1.75 ^{2.0 ± 0.1}
[.069] ^{[.079 ± .004]}
5.5
12.0 ^[.217]
[.472]
4.0 ± 0.1
[.157 ± .004]
Ø 1.50
[.059]
Center
Contact
0.30
[.012]
Ø 330
[12.99]
1.40
[.055]
Ø 13.0
[.512]
8.0
[.315]
Dimensions of Taping
1.60
[.063]
Dimensions Reel (2500 Pieces/Reel)
Soldering Profile —
SMT Receptacle
Recommended Temperature
Profile (Reference)
1. The preferred technique
for mounting the SMT
Receptacle package is to
reflow solder the device
onto a PCB (Printed
Circuit Board).
2. The maximum temperature
for the lead of PCB surface
does not exceed 240°C.
3. The right reflow soldering
profile is for reference and
will modify under individ-
ual different conditions.
Hand Soldering (Reference only)
1. Soldering iron: The
maximum temperature
is 240°C.
2. Soldering period: within
5 seconds.
(°C)
Heating peak
240°C – 3 seconds
260
240
220
200
Preheating 183°C
180
160
(130 to 165°C)
140
120
40 to 50
100
80
Within 2 minutes
seconds
TIME
228
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208