 English |
|
|
|
|
|
|
|
| 1055497-1 Datasheet, PDF (158/320 Pages) Tyco Electronics – RF Coax Products | |||
| |||
| ◁ |
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
The specifications given
refer specifically to mated
pair of Part Numbers
1059410-1 and 1059402-1
(RG 402) and 1059412-1
and 1059404-1 (RG 405).
Specifications on other con-
nectors are available on
request.
The general electrical,
mechanical and environ-
mental specifications in the
following table are recom-
mended for procurement
documents or drawings.
Engineering Data
Impedance â
Frequency â
Temperature Rating â
50 ohms
dc to 22.0 GHz
-65° to 125° C
Electrical
VSWR â
dc - 18.0 GHz
18.0 - 22.0 GHz
RF Transmission Loss â
Insulation Resistance â
Contact Resistance â
Center Contact
Outer Contact
Outer Contact to Cable
Dielectric Withstanding Voltage â
Corona Extinction Voltage at 70,000 Ft.â
RF High Potential at 5 MHz â
RF Leakage Interface Only â
Power Handling â
RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid
1.02 + .005f (GHz)
1.02 + .008f (GHz)
.03 x â-f- (GHz)
5,000 megohms min.
1.05 + .005f (GHz)
1.05 + .009f (GHz)
.03 x â-f- (GHz)
5,000 megohms min.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
2.0 milliohms max.
2.0 milliohms max.
0.5 milliohms max.
1500 volts RMS
1000 volts RMS
375 volts min.
335 volts min.
1,000 volts RMS
670 volts RMS
-(90-fGHz) dB min. (fully mated)
-(90-fGHz) dB min. (fully mated)
300W at 3 GHz (sea level) and room temperature
Environmental
Corrosion â
Vibration â
Shock â
Temperature Cycling â
Moisture Resistance â
Method 101, Condition B, MIL-STD-202
Method 204, Condition D, 20Gâs, MIL-STD-202
Method 213, Condition I, 100Gâs, MIL-STD-202
Method 107, Condition B, MIL-STD-202
Method 106, MIL-STD-202
Material
Housing â
Center Contact â
Dielectric â
Gasket (OâRing) â
Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Beryllium copper per ASTM-B-196
TFE fluorocarbon per ASTM-D-1457
MIL-P-25732
Mechanical
Force to Engage â
Force to Disengage â
Center Contact Retention â
Durablilty â
Radial Misalignment â
Rigid Mount
Float Mount
3 pounds max.
1.5 pounds max.
6 pounds min.
5,000 Cycles
±.10 [±. 004]
±.51 [±.020]
Mating Characteristics
Jack Connector â
Center Contact Socket
Insertion Force
Withdrawal Force
Oversize test Pin â
Test Pin Finish â
Insertion Depth â
Number of Insertions â
Test Pin â
Test Pin Finish â
Insertion Depth â
Insertion Force â
Test Pin â
Test Pin Finish â
Insertion Depth â
Withdrawal â
.945 + .003 [.0372 + .0001] dia.
16 micro inch
.76/1.14 [.030/.045]
3
.940 + .003 [.0370 + .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
3 pounds max.
.90 + .003 [.0355 - .0001] dia.
16 micro inch
1.27/1.91 [.050/.075]
1 ounce min.
Finish
Center Contact â
Housing â
Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
158
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese