1055497-1 Datasheet, PDF (213/320 Pages) Tyco Electronics – RF Coax Products

RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Specifications
General
Materials
SMT Plug
SSMT Cable Jack
Finish
Electrical
Frequency
Nominal Impedance
Voltage Rating
VSWR (Mated Pair)
Insulation Resistance
Dielectric Withstanding Voltage
Contact Resistance (Connectors Only)
Center Contact
Outer Contact
Insertion Loss (Connectors Only)
Mechanical
Connector Durability
Tape/Reel Packaging (Plug)
Force to Engage
Force to Disengage
Force to Disengage by
Cable Load (camout)
Environmental
Temperature Rating (Mated Pair)
Resistance to Solder Heat
Cable Specifications
Materials
Jacket:
Shield:
Dielectric:
Center Conductor:
Minimum Bend Radius
Insertion Loss (Cable Only)
Center Conductor Resistance
Housing:
Contacts:
Polyphenylene Sulfide (PPS)
Copper Alloy
Outer Contact:
Inner Contact:
Dielectric:
Beryllium Copper
Beryllium Copper
Polypropylene, GF
Plug and cable jack - Contacts: Gold plate over nickel plate
dc - 6 GHz
50 Ohms
250 Volts (VRMS Maximum) @ Sea Level
1.20:1 Maximum @ 2 GHz
1.40:1 Maximum @ 6 GHz
5000 Megohms Minimum
500 Volts (VRMS Minimum) @ Sea Level
15 milliohms Maximum
10 milliohms Maximum
.15dB Max. @ 6 GHz
100 mating cycles
12mm per EIA-481
5.5 lbs. Max. (3.5 lbs. typ.)
(2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.)
300 Grams Min. (800 Grams typ. initial mate)
–40°C (–40°F) to +125°C (257°F)
Infrared, convection and vapor phase solderable (plug only).
Maximum reflow time/temperature not to exceed 260°C for 3 minutes.
FEP (polytetrafluoroethylene)
Silver plated copper wire, 44 AWG, 90% min. coverage
PTFE ( polytetrafluoroethylene)
Silver plated copper clad steel, 30 AWG
6.35mm (.250 inch)
0.5 dB/ft., 2.0 dB/m @ 1 GHz
0.9 dB/ft., 3.0 dB/m @ 2 GHz
.25 Ohms per foot average.
819 milliohm/meter Nom.; 250 milliohm/Ft. Nom.
1.3
[.052]
Dia.
Ref.
1.0 _{Dia. Ref.}
[.040]
0.8 _{Dia. Ref.}
[.030]
0.3
[.010]
Dia.
Ref.
Outer Jacket
Shield
(Braid)
Dielectric
Center
Conductor
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
213
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208