1055497-1 Datasheet, PDF (153/320 Pages) Tyco Electronics – RF Coax Products

Specifications
General
Materials and Finishes
Housings and Center Contacts
Dielectric
Shrouds
Hermetic Seal
Electrical
Frequency Range
VSWR
Voltage Rating
Insertion Loss
Insulation Resistance
Dielectric Withstanding Voltage
RF High Potential
Impedance
RF Leakage
Contact Resistance
Mechanical
Durability
Radial Misalignment
Axial Misalignment
Force to Engage
Force to Disengage
Center Contact Retention
Environmental
Operating Temperature
Vibration
Shock
Thermal Shock
Moisture Resistance
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Beryllium Copper per ASTM-B-196; gold plate over nickel plate
PTFE Fluorocarbon per ASTM-D-1457
Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380
Glass bead
dc - 40.0 GHz
1.10:1 Maximum dc - 23.0 GHz
1.15:1 Maximum 23.0 - 26.0 GHz
1.40:1 Maximum 26.0 - 40.0 GHz
335 Vrms maximum at sea level
0.10 f√ (GHz) maximum
5000 megohms minimum
500 volts (VRMS minimum)
325 volts (VRMS minimum) @ 5 MHz
50 ohms nominal
-80dB to 3 GHz, -65dB from 3 to 26.5 dB minimum
Initial center contact 6.0 milliohms maximum
Outer contact 2.0 milliohms maximum
100 mating cycles minimum
±0.020 minimum
.000/.010
full detent
15.0 lbs. maximum
half detent
10.0 lbs. maximum
smooth bore
2.0 lbs. maximum
full detent
5.0 lbs. minimum
half detent
2.0 lbs. minimum
smooth bore
0.5 lbs. minimum
1.5 lbs. minimum axial force
-65°C to +165°C
per mil-std-202, method 204, test condition D
per mil-std-202, method 213, test condition I
per mil-std-202, method 107, test condition B
per MIL-STD-202 method 106, except step 7b shall be omitted. Resistance shall be 200 megohms
within 5 minutes after removal from humidity.
Interface Dimensions
Jack
EMI Ring
3.40
[.132]
Min.
Shroud
Full Detent
3.70 Dia.
[.145] Max.
Anti-Rock Ring
3.43 Dia.
[.135] Max.
Bullet
2.8
[.112]
Min.
3.43 Dia.
[.135] Max.
8.60 ± .076 _Dia.
[.142 ^{± .003}]
Smooth Bore
3.20 ^{± .050} _Dia.
[.125 ± .002]
2.80 ^{± .050}
[.110 ± .002]
GPO is a trademark of Corning Gilbert, Inc.
Note: The U.S. Government (DESC) has determined that the above specified
interface dimensions are interchangeable and intermateble with Corning
Gilbert GPO Series RF Connectors.¹
1 _{Per DESC drawing numbers 94007 and 94008, series SMP.}
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
153
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208