English
Language : 

1055497-1 Datasheet, PDF (130/320 Pages) Tyco Electronics – RF Coax Products
RF Coax Connectors
Series 1.0/2.3 (50 Ohm/75 Ohm) (Continued)
Technical Data
Electrical and mechanical
characteristics in accordance
with CECC 22230
Characteristic impedance —
50 Ω/75 Ω
Frequency range — up to 10 GHz/
2 GHz
Reflection factor, referred to
50 Ω cable1 —
up to 1 GHz, r ≤ 0.05
up to 4 GHz, r ≤ 0.07
up to 10 GHz, r ≤ 0.15
Reflection factor, referred to
75 Ω cable1 —
up to 2 GHz, r ≤ 0.10
Insulation resistance —
initial value ≥ 1 GΩ
after stressing ≥ 200 MΩ
Screening effectiveness2 —
≥ 90 dB
Inner conductor contact resistance
— after stressing ≤ 10 mΩ
Outer conductor continuity —
after stressing ≤ 7.5 mΩ
Voltage proof3 —
flexible cables (RG 316)
— at sea level, 750 V, 50 Hz
— at 20 km altitude, 150 V, 50 Hz
Working voltage3 —
flexible cables (RG 316)
— at sea level, 350 V, 50 Hz
— at 20 km altitude, 65 V, 50 Hz
Service life — 500 cycles
Climatic category — 40/85/21
Notes:
1 Guide values, depending on cable
type and connector style.
2 Values apply to a straight screw
and latching coupling with suitable
cable.
3 Some cables suitable for use with
these connectors have lower char-
acteristic values than specified
here.
4 For applicable cable types see
page 151.
Coupling Types
Type A
Screw coupling; version
with union nut
This type permits the plug
and jack to be screwed
together manually by
means of a union nut
secured to the plug. This
is necessary for readily
accessible locations, front
panel test points and cable
connections.
Type C
Slide-in coupling; version
with centering ferrule
In this type of coupling, the
plug features a guide ferrule
with a conical entry surface.
This ensures that the float-
able bulkhead plugs with
cable connection make a
reliable electrical connec-
tion to the rigid installed
jack. Examples of this are
single and multi-contact
connections of slide-in
applications. “W” denotes
the allowed spacing of the
mounting panel for satisfac-
tory contact when the con-
nection is made.
Type F
Latching coupling (Quick
Lock)
In this version, the cable
plugs bear a funnel ferrule
with built-in spring which
snaps into a groove on the
jack, simultaneously locking
the connection. The connec-
tion can be easily separated
by lightly pulling the outer
sleeve of the plug. This type
of coupling can be used
with a higher packing den-
sity, as the screw coupling.
130
Catalog 1307191
Revised 3-07
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208