M08035 Datasheet, PDF (5/49 Pages) M/A-COM Technology Solutions, Inc. – SD, HD, 3G Multi-rate Reclocker

Electrical Characteristics
Table 1-4. High Speed Input Electrical Specifications
Symbol
Parameter
Conditions
Note Minimum
Typical Maximum Unit
DR Input data rate (M08035) SD Operation
—
270
—
Mbps
HD Operation
—
1485, 1483.5
—
Mbps
Reclocker bypassed
18
—
3400
Mbps
DR Input data rate (M08045) SD Operation
—
270
—
Mbps
HD Operation
—
1485, 1483.5
—
Mbps
3G Operation
—
2970, 2967
—
Mbps
Reclocker bypassed
18
—
3400
Mbps
V_IN Differential input voltage At the chip input (point blank)
1, 3
300
Input equalization disabled
LOS enabled (default setting)
800
1600
mV_PPD
V_ICM Input common mode
voltage
At the chip input (point blank)
Input equalization disabled
LOS enabled
AV_DDI-0.6
—
AV_DDI+0.1
V
R_IN Input Termination to
AV_DDI
IE Input Equalization
40
2
—
50
60
Ω
0, 2, 4, 6
—
dB
I_IN
Maximum high-speed
input current
4
-100
100
mA
NOTE:
1. For example, 1200 mV_PPD = 600 mV_PP for each single-ended terminal.
2. These values correspond to: off, small, medium, and large respectively. The small setting is not available in hardware mode.
3. When using long traces and input equalization enabled, MACOM recommends a minimum input swing of 400 mV_PPD. With video stress
patterns, DC coupling produces the best results.
4. Exposure of the device beyond the minimum/maximum limits may cause permanent damage. Limits listed in the above table are stress limits
only, and do not imply functional operation within these limits.
M08035, M08045 Data Sheet V1
MACOM™
5
080x5-DSH-001